What 8-16 mesh is
8-16 mesh crumb passes a No. 8 sieve (2.36 mm, about 0.093 in) and is mostly retained on a No. 16 sieve (1.18 mm, about 0.046 in). Each granule is roughly 1.2 to 2.4 mm across, a little bigger than 10-20 mesh.
That extra size is the point. Coarser granules sit differently in turf fibers, drain faster, and give molded products a more open, resilient structure.
Where 8-16 goes
Synthetic turf infill
NYSDOH describes turf crumb as roughly 1/16 to 1/4 inch (about 1.6 to 6.4 mm), applied at 2 to 3 lb per square foot. 8-16 mesh lands in the lower part of that range. Many turf systems specify 10-20, some specify 8-16 or a blend. The system manufacturer's spec decides.

Molded products
Coarse granules make thick, open-structured products like stall mats, wheel chocks, curb stops and speed bumps. Coarser crumb has less surface area, so it generally needs less binder than fine crumb for the same mass.
Surfacing base courses
Bound base layers for poured-in-place and other resilient surfaces often use coarse recycled rubber granules. Installers follow ASTM F2479; finished systems are tested to ASTM F1292.
Equestrian, landscape and specialty uses
Ask. If your product calls for a coarse granule, send the sieve curve.
Worked example
Topping up a worn field
Turf maintenance crews add infill where it migrates out of high-traffic zones like goal mouths and center field. Writing in SportsTurf (October 2012), field-maintenance contractor Jim Cornelius, CSFM, noted that most crumb rubber infill "calculates to 0.55 pounds per square foot for a ¼-inch lift."
Topping up 10,000 sq ft of high-wear area by 1/4 inch:
- 10,000 × 0.55 = 5,500 lb, about 3 supersacks
That's a small order we'll still ship. If you manage several fields, bundle the season's top-ups into one truck and save on freight.
Quote 8-16 for your system. Send grade, volume, delivery city/ZIP and your target price.
Request a QuoteSpec sheet
| Nominal size | 8-16 mesh |
|---|---|
| Full sieve distribution | typical zero on No.8; <=5% retained on No.10 framing. |
| Sieve standard / test method | ASTM D5644 (lot sieve report on request) |
| Residual steel (max) | typical ≤0.10% by weight (ASTM D5603) |
| Fiber (max) | Production target ≤0.01% by weight (ASTM D5603) |
| Moisture (max) | typical ≤1.0% by weight (ASTM D5603) |
| Specific gravity | typical ~1.15 |
| Source / classification | typical recycled passenger and/or truck tires · ground rubber (ASTM D5603) |
| Availability | Available / made to order - confirmed at quote |
| Packaging | Supersacks / bulk bags, with or without pallets · typical ~2,000 lb net per sack (confirmed on quote). Gaylords or loose bulk on request. |
| Minimum order | typical one supersack (~2,000 lb) · truckload programs preferred |
| Lead time | typical made-to-order lead time confirmed at quote |
typical = representative or industry-standard value, confirmed per lot and in your written quote. Mesh labels alone don't describe the full distribution.
Download the 8-16 mesh PDF data sheet.
Frequently asked questions
Is 8-16 coarser than 10-20?
Yes. 8-16 passes a 2.36 mm opening; 10-20 passes a 2.00 mm opening. 8-16 also holds on a larger bottom screen (1.18 mm vs 850 µm).
Is 8-16 in stock?
8-16 is made to order. Lead time and volume are confirmed on your quote. If you need regular loads, we'll schedule production for you.
Can I get a blend of 8-16 and 10-20?
Tell us the target sieve curve and we'll tell you what's feasible.
Do you guarantee turf or playground compliance?
No. Compliance belongs to the finished system and its testing. We supply material to your spec and back each lot with data.
Sources: NYSDOH synthetic turf fact sheet; J. Cornelius, "The basics of maintaining synthetic turf," SportsTurf, Oct. 2012 (archived PDF); ASTM E11; ASTM F1292, F2479.





