Request a Quote
For permitted fuel users

Tire-Derived Fuel (TDF)

Nominal 1-inch-minus TDF chips for cement kilns, pulp and paper mills and other facilities permitted to burn tire-derived fuel. Sized and spec'd against your acceptance criteria.

Pile of 1-inch tire-derived fuel chips with a cement plant in the background

What TDF is

Tire-derived fuel is scrap tire rubber shredded or chipped to a size a combustion system can feed. The U.S. EPA describes tires as producing "the same amount of energy as oil and 25% more energy than coal," and notes that TDF is typically used as a supplement to coal or wood.

TDF is a big, established market. According to the U.S. Tire Manufacturers Association's 2021 scrap tire report, TDF consumed about 28 percent of U.S. scrap tires, including:

TDF market (2021) Scrap tires consumed
Cement kilns 682 thousand tons
Pulp and paper mills 524 thousand tons
Electric and industrial utility boilers 187 thousand tons

Who it's for

TDF is for facilities that are permitted and equipped to burn it. EPA's guidance supports responsible TDF use in cement kilns and other industrial facilities that have a tire storage and handling plan, the applicable permits, and proper combustion controls. Acceptance criteria are facility-specific.

Pile of 1-inch tire-derived fuel chips with a cement plant in the background
1-inch-minus TDF chips. Chip size, wire content and moisture are set by the receiving facility.

Specs we match

Every fuel buyer has an acceptance spec. Common line items:

  • Chip size: nominal 1-inch-minus is standard for us; send your size spec
  • Wire: wire-in or reduced-wire, matched to your system. EPA notes some users, like many paper mills, need de-wired TDF
  • Moisture: low; tires don't hold much water
  • Heating value, sulfur, chlorine: reported against ASTM methods on request

Our TDF spec sheet lists typical values; your contract spec controls.

Worked example

Sizing a kiln trial

A cement plant wants to trial TDF at a modest feed rate of 2 tons per hour for a 72-hour test:

  • 2 tons/hr × 72 hr = 144 tons = 288,000 lb of TDF
  • At typical 40,000-44,000 lb per truck, that's about 7 truckloads scheduled across the trial

We can stage loads to your yard capacity and test window. Permits, feed system and emissions testing are on the facility side.

Send your fuel acceptance spec. Send grade, volume, delivery city/ZIP and your target price.

Request a Quote

Spec sheet

Spec sheet · RE-TDF
Chip sizeNominal ≤1" / 1" Minus (facility acceptance rules apply)
Wire-in or wire-removedConfirmed against your facility spec at quote
Steel / wire content (max)Production target <1%
Moisture (max)≤2.0%
Heating value (HHV)typical 14,000–15,500 BTU/lb (ASTM D5865)
Sulfur / chlorinetypical sulfur <2.0% (ASTM D4239); chlorine <0.30% (ASTM D4208)
AvailabilityAvailable — volume confirmed at quote
Packaging / loadingSupersacks with or without pallets, or bulk load-out on request
Minimum ordertypical one supersack (~2,000 lb) · truckload programs preferred
Lead timetypical 3–10 business days for in-stock grades; allocation confirmed at quote

typical = representative or industry-standard value, confirmed per lot and in your written quote. Mesh labels alone don't describe the full distribution.

Download the TDF PDF data sheet.

Frequently asked questions

What size TDF do you ship?

Nominal 1-inch-minus is our standard. Other sizes are discussed against your feed system.

Can you supply de-wired TDF?

Wire content is matched to your spec on quote. We don't claim a wire-free grade until it's documented.

How is TDF shipped?

In supersacks with or without pallets, or bulk load-out on request. Tell us what your receiving yard can handle.

Do you supply facilities without a permit?

No. TDF goes only to facilities permitted and equipped to burn it.

Sources: U.S. EPA, Tire-Derived Fuel (archive.epa.gov); USTMA 2021 US Scrap Tire Management Summary (summary).

Need crumb rubber
by the truckload?

Send your grade, quantity and delivery ZIP or export destination. We'll review availability, packaging and freight, then come back with a written quote.

Request a Quote CallEmail